View HA3-BO-24-450-1B1-DC_5329996.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

h-series circuit breaker product bulletin #139 january 2012 carling technologies, inc. 60 johnson avenue ? plainville, ct 06062-1177 phone: (860) 793-9281 ? fax: (860) 793-9231 email: sales@carlingtech.com ? www.carlingtech.com curved rocker with guard handle actuator flat with pushCtoCreset actuator curved rocker actuator the h-series hydraulic/magnetic circuit breaker provides dependable circuit protection in a low cost, compact package. by meeting the iec spacing requirements, the h-series is the ideal choice for international market applications. it also features a trip-free mechanism, which will open the contacts when a fault condition occurs, even if the handle is held in the on position. although a low cost option, the h-series was designed for maximum performance and reliable equipment protection meeting carlings stringent quality standards. key features & benefts: ? choice of actuator styles ? ul1077, ccc, csa, c22.2 and en60934 approvals ? compact size ? temperature stable operation -40 o c to 80 o c ? choice of terminals, including pcb ? single or multi-pole confgurations
dc-ohms 50/60hz-ohms 1 0.8 50 .87 2.5 0.1 30 .15 5 0.035 0.03 6 7.5 0.018 0.01 9 10 0.0 10 .011 15 0.006 0.0061 20 0.005 0.0051 25 0.003 0.0035 30 0.002 50 .0026 current rating in amperes series 2 | h-series C general specifcations mechanical physical agency approvals electrical tables ul recognized under the component recognition program as protectors, supplementary (guide qvnu2 file e75596) ul standard 1077 ccc certifed, certifcate no. 2010010307447291 csa accepted circuit breaker, csa standard c22.2 no. 235 tuv certifed to en60934, certifcate no. r50204086 table a: lists ul recognized, csa accepted and tuv certifed confgurations and performance capabilities as a component supplementary protector. dcr and impedance values are based on measurements by the voltmeter ammeter method. rated current is applied for one hour and at a voltage not less than 20 volts. ambient temperature: 25 ; tolerance: below 10 amps +/- 25%; above 10 amps +/-35% electrical typical protector resistance impedance chart maximum voltage current rating auxiliary switch rating endurance number of poles weight internal circuit confg. 250vac 50/60hz 80 vdc standard current coils: 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 20.0, 25.0, 30.0, 32.0 spdt: 10.1a-250vac, 1.0a-65vdc/0.5a-80vdc, 0.1a-125vac (with gold contacts) 10,000 on-off operations @ 6 per minute; with rated current & voltage 1-3 approx. 48 grams/pole (1.7 oz) series and switch only (with or without auxiliary switch) circuit current configuration max ul csa tuv rating minimum poles without backup fuse without backup fuse without backup fuse ul csa 65 dc -- 1 - 32 1 3000 3000 1500(pc1) tc1, ol1, u1 tc1, ol1, u1 65 dc -- 1 - 32 1 --- 500 --- --- tc1, ol1, u3 80 dc -- 1 - 25 1 1000 800 1000(pc1) tc1, ol1, u1 tc1, ol1, u1 80 1 dc -- 26 - 32 1 1000 1000 1000(pc1) tc1, ol1, u3 tc1, ol1, u3 250 50/60 1 1 - 32 1 1500 1500 1000(pc1) tc1, ol1, u1 tc1, ol1, u1 250 50/60 1 1 - 32 2 1500 1500 1000(pc1) tc1, ol1, u3 tc1, ol1, u3 250 50/60 3 1 - 32 3 1500 1500 1000(pc1) tc1, ol0, u3 tc1, ol0, u3 1 - polarity sensitive application codes short circuit capacity (amps) series voltage h series - component supplementary protector freq. phase full load *manufacturer reserves the right to change product specification without prior notice. 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
h-series C dimensional specifcations: in. [mm] C handle actuator | 3 line load 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
4 | h-series C dimensional specifications: in. [mm] C curved rocker actuator screw type teminals in series trip circuit configuration shown. for others configurations, see circuit and terminal diagrams. line line line line load load load load pole 1 pole 2 pole 3 1-pole (hj1) 3-pole (hj3) 2-pole (hj2) panel cutout detail tolerance .005[ .12] unless otherwise specified + + multi-pole identification scheme as viewed from terminal end of breaker. notes: 1. all dimensions are in inches [mm] 2. tolerance .020 [.51] unless otherwise specified. + d a te d w g n o r e v l e t a p v d b y r e v i s i on s ti tle d r b y 1 . 146 [ 2 9 . 1 2 ] 0 . 640 [ 1 6 . 2 7 ] 1 . 382 [ 3 5 . 1 0 ] # 6 - 3 2 [ m 3 ] t h r e a d * 0 . 1 3 8 [ 3 . 5 0 ] d e e p 2 p l c s p e r p o l e 1 . 382 [ 3 5 . 1 0 ] 0 . 630 [ 1 6 . 0 0 ] 1 . 260 [ 3 2 . 0 1 ] 0 . 161 [ 4 . 0 8 ] 0 . 413 [ 1 0 . 5 0 ] 1 . 130 [ 2 8 . 7 0 ] 1 . 382 [ 3 5 . 1 1 ] 1 . 693 [ 4 3 . 0 1 ] 0 . 778 [ 1 9 . 7 5 ] 1 . 197 [ 3 0 . 4 0 ] 0 . 118 [ 2 . 9 9 ] o pt i o n a l " r o c ker g u a r d " s h t of 0 . 126 [ 3 . 2 0 ] 0 . 650 [ 1 6 . 5 1 ] m a x 1 . 654 [ 4 2 . 0 0 ] 0 . 346 [ 8 . 8 0 ] 0 . 118 [ 3 . 0 0 ] 1 . 130 [ 2 8 . 7 0 ] 1 . 726 [ 4 3 . 8 3 ] 0 . 357 [ 9 . 0 8 ] 1 . 732 [ 4 4 . 0 0 ] 2 . 354 [ 5 9 . 7 8 ] t a b ( q . c . ) t y p e 2 . 354 [ 5 9 . 7 8 ] s c r e w t y p e 1 . 414 [ 3 5 . 9 0 ] c o n n c 0 . 630 [ 1 6 . 0 0 ] t y p 1 . 929 [ 4 9 . 0 0 ] m a x 1 . 280 [ 3 2 . 5 1 ] m a x 2 - ? 0 . 1 5 6 [ ? 3 . 9 6 ] d a te d w g n o r e v l e t a p v d b y r e v i s i on s ti tle d r b y 1 . 146 [ 2 9 . 1 2 ] 0 . 640 [ 1 6 . 2 7 ] 1 . 382 [ 3 5 . 1 0 ] # 6 - 3 2 [ m 3 ] t h r e a d * 0 . 1 3 8 [ 3 . 5 0 ] d e e p 2 p l c s p e r p o l e 1 . 382 [ 3 5 . 1 0 ] 0 . 630 [ 1 6 . 0 0 ] 1 . 260 [ 3 2 . 0 1 ] 0 . 161 [ 4 . 0 8 ] 0 . 413 [ 1 0 . 5 0 ] 1 . 130 [ 2 8 . 7 0 ] 1 . 382 [ 3 5 . 1 1 ] 1 . 693 [ 4 3 . 0 1 ] 0 . 778 [ 1 9 . 7 5 ] 1 . 197 [ 3 0 . 4 0 ] 0 . 118 [ 2 . 9 9 ] o pt i o n a l " r o c ker g u a r d " s h t of 0 . 126 [ 3 . 2 0 ] 0 . 650 [ 1 6 . 5 1 ] m a x 1 . 654 [ 4 2 . 0 0 ] 0 . 346 [ 8 . 8 0 ] 0 . 118 [ 3 . 0 0 ] 1 . 130 [ 2 8 . 7 0 ] 1 . 726 [ 4 3 . 8 3 ] 0 . 357 [ 9 . 0 8 ] 1 . 732 [ 4 4 . 0 0 ] 2 . 354 [ 5 9 . 7 8 ] t a b ( q . c . ) t y p e 2 . 354 [ 5 9 . 7 8 ] s c r e w t y p e 1 . 414 [ 3 5 . 9 0 ] c o n n c 0 . 630 [ 1 6 . 0 0 ] t y p 1 . 929 [ 4 9 . 0 0 ] m a x 1 . 280 [ 3 2 . 5 1 ] m a x 2 - ? 0 . 1 5 6 [ ? 3 . 9 6 ] 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
h-series C dimensional specifications: in. [mm] C flat rocker actuator | 5 d a te d w g n o r e v l e t a p v d b y r e v i s i on s ti tle d r b y 1 . 1 4 6 [ 2 9 . 1 2 ] 0 . 6 4 0 [ 1 6 . 2 7 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 0 . 6 3 0 [ 1 6 . 0 0 ] 1 . 2 6 0 [ 3 2 . 0 1 ] 0 . 1 6 1 [ 4 . 0 8 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 3 8 2 [ 3 5 . 1 1 ] 1 . 6 9 3 [ 4 3 . 0 1 ] 0 . 7 7 8 [ 1 9 . 7 5 ] 1 . 1 9 7 [ 3 0 . 4 0 ] 0 . 1 1 8 [ 2 . 9 9 ] s h t o f 0 . 1 2 6 [ 3 . 2 0 ] 0 . 6 5 0 [ 1 6 . 5 1 ] m a x 1 . 6 5 4 [ 4 2 . 0 0 ] 0 . 1 1 8 [ 3 . 0 0 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 7 2 6 [ 4 3 . 8 3 ] 0 . 3 5 7 [ 9 . 0 6 ] 1 . 7 3 2 [ 4 4 . 0 0 ] 2 . 3 5 3 [ 5 9 . 7 6 ] t ab(q . c . )t ype 2 . 3 5 3 [ 5 9 . 7 6 ] sc r ew t ype 1 . 4 1 4 [ 3 5 . 9 0 ] 0 . 6 3 0 [ 1 6 . 0 0 ] t y p 1 . 9 2 9 [ 4 9 . 0 0 ] m a x 1 . 2 8 0 [ 3 2 . 5 1 ] m ax 2 - ? 0 . 1 5 6 [ ? 3 . 9 6 ] 0 . 3 5 9 [ 9 . 1 2 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 0 . 1 2 6 [ 3 . 2 0 ] 0 . 6 5 0 [ 1 6 . 5 1 ] m a x 0 . 1 1 8 [ 3 . 0 0 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 7 2 6 [ 4 3 . 8 3 ] 0 . 3 5 9 [ 9 . 1 2 ] d a te d w g n o r e v l e t a p v d b y r e v i s i on s ti tle d r b y 1 . 1 4 6 [ 2 9 . 1 2 ] 0 . 6 4 0 [ 1 6 . 2 7 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 0 . 6 3 0 [ 1 6 . 0 0 ] 1 . 2 6 0 [ 3 2 . 0 1 ] 0 . 1 6 1 [ 4 . 0 8 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 3 8 2 [ 3 5 . 1 1 ] 1 . 6 9 3 [ 4 3 . 0 1 ] 0 . 7 7 8 [ 1 9 . 7 5 ] 1 . 1 9 7 [ 3 0 . 4 0 ] 0 . 1 1 8 [ 2 . 9 9 ] s h t o f 0 . 1 2 6 [ 3 . 2 0 ] 0 . 6 5 0 [ 1 6 . 5 1 ] m a x 1 . 6 5 4 [ 4 2 . 0 0 ] 0 . 1 1 8 [ 3 . 0 0 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 7 2 6 [ 4 3 . 8 3 ] 0 . 3 5 7 [ 9 . 0 6 ] 1 . 7 3 2 [ 4 4 . 0 0 ] 2 . 3 5 3 [ 5 9 . 7 6 ] t ab(q . c . )t ype 2 . 3 5 3 [ 5 9 . 7 6 ] sc r ew t ype 1 . 4 1 4 [ 3 5 . 9 0 ] 0 . 6 3 0 [ 1 6 . 0 0 ] t y p 1 . 9 2 9 [ 4 9 . 0 0 ] m a x 1 . 2 8 0 [ 3 2 . 5 1 ] m ax 2 - ? 0 . 1 5 6 [ ? 3 . 9 6 ] 0 . 3 5 9 [ 9 . 1 2 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 0 . 1 2 6 [ 3 . 2 0 ] 0 . 6 5 0 [ 1 6 . 5 1 ] m a x 0 . 1 1 8 [ 3 . 0 0 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 7 2 6 [ 4 3 . 8 3 ] 0 . 3 5 9 [ 9 . 1 2 ] d a te d w g n o r e v l e t a p v d b y r e v i s i on s ti tle d r b y 1 . 1 4 6 [ 2 9 . 1 2 ] 0 . 6 4 0 [ 1 6 . 2 7 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 0 . 6 3 0 [ 1 6 . 0 0 ] 1 . 2 6 0 [ 3 2 . 0 1 ] 0 . 1 6 1 [ 4 . 0 8 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 3 8 2 [ 3 5 . 1 1 ] 1 . 6 9 3 [ 4 3 . 0 1 ] 0 . 7 7 8 [ 1 9 . 7 5 ] 1 . 1 9 7 [ 3 0 . 4 0 ] 0 . 1 1 8 [ 2 . 9 9 ] s h t o f 0 . 1 2 6 [ 3 . 2 0 ] 0 . 6 5 0 [ 1 6 . 5 1 ] m a x 1 . 6 5 4 [ 4 2 . 0 0 ] 0 . 1 1 8 [ 3 . 0 0 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 7 2 6 [ 4 3 . 8 3 ] 0 . 3 5 7 [ 9 . 0 6 ] 1 . 7 3 2 [ 4 4 . 0 0 ] 2 . 3 5 3 [ 5 9 . 7 6 ] t ab(q . c . )t ype 2 . 3 5 3 [ 5 9 . 7 6 ] sc r ew t ype 1 . 4 1 4 [ 3 5 . 9 0 ] 0 . 6 3 0 [ 1 6 . 0 0 ] t y p 1 . 9 2 9 [ 4 9 . 0 0 ] m a x 1 . 2 8 0 [ 3 2 . 5 1 ] m ax 2 - ? 0 . 1 5 6 [ ? 3 . 9 6 ] 0 . 3 5 9 [ 9 . 1 2 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 0 . 1 2 6 [ 3 . 2 0 ] 0 . 6 5 0 [ 1 6 . 5 1 ] m a x 0 . 1 1 8 [ 3 . 0 0 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 7 2 6 [ 4 3 . 8 3 ] 0 . 3 5 9 [ 9 . 1 2 ] d a te d w g n o r e v l e t a p v d b y r e v i s i on s ti tle d r b y 1 . 1 4 6 [ 2 9 . 1 2 ] 0 . 6 4 0 [ 1 6 . 2 7 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 0 . 6 3 0 [ 1 6 . 0 0 ] 1 . 2 6 0 [ 3 2 . 0 1 ] 0 . 1 6 1 [ 4 . 0 8 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 3 8 2 [ 3 5 . 1 1 ] 1 . 6 9 3 [ 4 3 . 0 1 ] 0 . 7 7 8 [ 1 9 . 7 5 ] 1 . 1 9 7 [ 3 0 . 4 0 ] 0 . 1 1 8 [ 2 . 9 9 ] s h t o f 0 . 1 2 6 [ 3 . 2 0 ] 0 . 6 5 0 [ 1 6 . 5 1 ] m a x 1 . 6 5 4 [ 4 2 . 0 0 ] 0 . 1 1 8 [ 3 . 0 0 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 7 2 6 [ 4 3 . 8 3 ] 0 . 3 5 7 [ 9 . 0 6 ] 1 . 7 3 2 [ 4 4 . 0 0 ] 2 . 3 5 3 [ 5 9 . 7 6 ] t ab(q . c . )t ype 2 . 3 5 3 [ 5 9 . 7 6 ] sc r ew t ype 1 . 4 1 4 [ 3 5 . 9 0 ] 0 . 6 3 0 [ 1 6 . 0 0 ] t y p 1 . 9 2 9 [ 4 9 . 0 0 ] m a x 1 . 2 8 0 [ 3 2 . 5 1 ] m ax 2 - ? 0 . 1 5 6 [ ? 3 . 9 6 ] 0 . 3 5 9 [ 9 . 1 2 ] 1 . 3 8 2 [ 3 5 . 1 0 ] 0 . 1 2 6 [ 3 . 2 0 ] 0 . 6 5 0 [ 1 6 . 5 1 ] m a x 0 . 1 1 8 [ 3 . 0 0 ] 1 . 1 3 0 [ 2 8 . 7 0 ] 1 . 7 2 6 [ 4 3 . 8 3 ] 0 . 3 5 9 [ 9 . 1 2 ] push-to-reset actuator screw type teminals in series trip circuit configuration shown. for others configurations, see circuit and terminal diagrams. line line line line #6-32[m3] thread *0.138[3.50] deep 2 plcs per pole load load load load 1-pole (h31) 2-pole (h71) 2-pole (h72) 3-pole (h73) panel cutout detail tolerance .005[ .12] unless otherwise specified multi-pole identification scheme as viewed from terminal end of breaker. + + notes: 1. all dimensions are in inches [mm] 2. tolerance .020 [.51] unless otherwise specified. + 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
6 | h-series C dimensional specifications: in. [mm] C pc teminals printed circuit board mounting terminal code s & t printed circuit board mounting terminal code r printed circuit board mounting terminal code l notes: 1. all dimensions are in inches [mm] 2. tolerance .020 [.51] unless otherwise specified. + 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
h-series C dimensional specifications: in. [mm] C pc teminals | 7 p.c. foot print for terminal code s & t p.c. foot print for terminal code r p.c. foot print for terminal code l notes: 1. all dimensions are in inches [mm] 2. tolerance .020 [.51] unless otherwise specified. + 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
u p t u r n l u g tab (q.c.) bus p.c. terminal terminal dimensional detail & rating 90 facing left straight (short) straight (long) 90 facing right p.c. terminal p.c. terminal 1 . 6 93 [ 4 3 . 0 0 ] 1 . 0 12 [ 2 5 . 7 0 ] 1 . 1 97 [ 3 0 . 4 0 ] 1 . 4 13 [ 3 5 . 9 0 ] s e e t a b l e b 1 . 5 08 [ 3 8 . 3 0 ] 1 . 4 13 [ 3 5 . 9 0 ] 3 0 3 0 3 0 1 . 8 54 [ 4 7 . 1 0 ] 1 . 7 32 [ 4 4 . 0 0 ] r e f r e l e a s e d p e r e c o 1 1 2 4 3 0 . 1 20 [ 3 . 0 5 ] 0 . 0 31 [ 0 . 8 0 ] a 0 2 - 1 9 - 0 9 b s e e e c o 1 1 6 2 7 0 5 - 1 9 - 0 9 c s e e e c o 1 2 5 0 3 1 1 - 0 6 - 0 9 d s e e e c o 1 4 8 9 9 0 4 - 0 1 - 1 1 0 . 2 6 4 [ 6. 70 ] 0 . 2 5 0 [ 6. 35 ] ? 0. 06 7 [ ? 1 . 7 1] 0 . 2 6 4 [ 6. 70 ] 0 . 3 5 4 [ 9. 00 ] 0 . 3 5 4 [ 9. 00 ] 0 . 2 6 4 [ 6. 70 ] 0 . 5 5 9 [ 14 . 19 ] 0 . 2 8 7 [ 7. 29 ] 0 . 1 9 7 [ 5. 00 ] 0 . 0 4 7 [ 1. 20 ] 0 . 3 1 5 [ 8. 00 ] 0 . 1 9 7 [ 5. 00 ] 0 . 0 4 7 [ 1. 20 ] 0 . 3 8 1 [ 9. 69 ] 0 . 3 1 5 [ 8. 00 ] 0 . 1 9 7 [ 5. 00 ] 0 . 0 4 7 [ 1. 20 ] 0 . 8 0 6 [ 20 . 48 ] handle position vs. aux switch mode circuit breaker mode table a tightening torque specifications table b thread size barrier for ul-recognized multi-pole breakers * available on series trip and switch only circuits. when called for on multi-pole units, only one aux. switch is normally supplied, as shown in multi-pole identification scheme. 1. all dimensions are in inches [mm] 2. tolerance .020 [.51] unless otherwise specified. #6-32 & m3 mounting hardware #8-32 & m4 thread terminal screw torque tab (q.c.) main terminal description depth behind panel aux. switch* 1.996 [50.70] screw type 1.996 [50.70] .110 tab (q.c.) 2.467 [62.67] solder type 2.252 [57.19] 7-9 in-lbs [0.8-1.0 nm] 12-15 in-lbs [1.4-1.7 nm] handle position standard c/b aux. switch mode off off nc no c nc no c nc no c off o on on line load line load electrical trip 8 | h-series C dimensional specifications: in. [mm] C circuit & terminal 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
b,c b,c g h-series C dimensional specifications: in. [mm] C circuit & terminal | 9 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
percen t of ra ted current 10 | h-series time delay values notes: delay curves 11,12,14,16,21,22,24,26: breakers to hold 100% and must trip at 125% of rated current and greater within the time limit shown in this curve. delay curves 10,20: breakers to hold 100% and must trip at 150% of rated current and greater within the time limit shown in this curve. all curves: curve data shown represents breaker response at ambient temperature of 77f (25c) with no preloading. breakers are mounted in standard wall-mount position. the minimum inrush pulse tolerance handling capability is 12 times the rated current. these values are based on a 60 hz 1/2 cycle, 8.33 ms pulse. ac instantaneous ultrashort short dc 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
h-series time delay values | 11 high inrush ac ac high inrush dc dc short medium medium long long 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
12 | h-series handle actuator C ordering scheme 1 series 2 actuator 3 poles 5 aux/alarm switch 6 frequency & delay 7 current rating 8 terminal 9 actuator color & legend 10 mounting bezel/barrier 11 rating 12 agency approval 4 circuit notes: 1 actuator option a: handle tie pin, spacer & retainers provided unassembled on multipole units. actuator option b: handle location as viewed from front of panel: 2 pole: left pole; 3 pole: center pole 2 standard multipole units have all poles identical, except when specifying auxiliary switch 3 auxiliary switch available on series trip and switch only circuits to 32a. on multipole units, only one aux. switch is normally supplied, mounted in extreme right pole. 4 separate pole type voltage coils not rated for continuous duty. available only with delay code 10 & 20. only available w/ agency code c. 5 for other current ratings, consult factory. 6 26-32a polarity sensitive, only available as 1 pole unit. 7 voltage code 4 available to 25a max. h a b 1 1 c 3 0 b d 24 450 1 series h 2 actuator 1 a handle, one per pole b handle, one per unit 8 terminal 1 push on 0.250 tab (q.c.) 2 screw 8-32 w/upturned lugs 3 screw 8-32 (bus type) a screw m4 w/upturned lugs b screw m4 (bus type) l 90 facing left r 90 facing right s straight t straight, long 3 pole 2 1 one 2 two 3 three 4 circuit a switch only (no coil) b series trip (current) c 4 series trip (voltage) g 4 relay trip (voltage) 5 auxiliary/alarm switch 0 w/o aux switch 1 3 0.110 q.c. term 2 3 0.110 solder lug 3 3 0.110 q.c. term w/ gold contacts 4 3 0.110 pc term 6 frequency & delay 03 dc 50/60hz, switch only 10 4 dc instantaneous 11 dc ultra short 12 dc short 14 dc medium 16 dc long 20 4 50/60hz instantaneous 21 50/60hz ultra short 22 50/60hz short 24 50/60hz medium 26 50/60hz long 30 dc, 50/60hz, instantaneous 31 dc, 50/60hz,ultra short 32 dc, 50/60hz, short 34 dc, 50/60hz, medium 36 dc, 50/60hz, long 42 4 50/60hz short, hi-inrush 44 4 50/60hz medium, hi-inrush 46 4 50/60hz long, hi-inrush 52 4 dc short, hi-inrush 54 4 dc medium, hi-inrush 56 4 dc long, hi-inrush 7 current rating (amperes) 5 410 1.000 512 1.250 415 1.500 517 1.750 420 2.000 522 2.250 425 2.500 527 2.750 430 3.000 435 3.500 440 4.000 445 4.500 450 5.000 455 5.500 460 6.000 465 6.500 470 7.000 475 7.500 480 8.000 485 8.500 490 9.000 495 9.500 610 10.000 710 10.500 611 11.000 711 11.500 612 12.000 712 12.500 613 13.000 614 14.000 615 15.000 616 16.000 617 17.000 618 18.000 620 20.000 622 22.000 624 24.000 625 25.000 630 30.000 632 32.000 code amperes a06 6dc 5dc a12 12dc 10dc a18 18dc 15dc a24 24dc 20dc a32 32dc 25dc a48 48dc 40dc a65 65dc 55dc j06 6ac 5ac j12 12ac 10ac j18 18ac 15ac j24 24ac 20ac j48 48ac 40ac j65 65ac 55ac k20 120ac 65ac l40 240ac 130ac b10 110dc 59dc b20 120dc 65dc code rating trip volts voltage rating 9 actuator color & legend actuator color white black red green blue yellow gray orange i-o a c f h k m p r on-off b d g j l n q s dual 1 2 3 4 5 6 7 8 legend color black white white white white black black black printed circuitboard terminals 10 mounting / barriers mounting style threaded insert 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm barriers no yes no yes no yes no yes 1 a 2 b 3 c 4 d bezel domed domed domed domed fat fat fat fat 11 max. application rating a 65dc d 240ac m 80dc 6 12 agency approval a without approvals c ul recognized, csa accepted, ccc certifed e ul recognized, csa accepted, tuv certifed 5 ul recognized, csa accepted, tuv certifed, ccc certifed 4 80vdc/250vac 7 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
h-series curved rocker actuator C ordering scheme | 13 1 series 2 actuator 3 poles 5 aux/alarm switch 6 frequency & delay 7 current rating 8 terminal 9 actuator color & legend 10 mounting bezel/barrier 11 rating 12 agency approval 4 circuit h j b 1 1 c 3 0 b d 10 450 1 series ( visi rocker ) h 2 actuator 1 j vertical - indicate off k vertical - indicate on 8 terminal 1 push on 0.250 tab (q.c.) 2 screw 8-32 w/upturned lugs 3 screw 8-32 (bus type) a screw m4 w/upturned lugs b screw m4 (bus type) l 90 facing left r 90 facing right s straight t straight, long 3 pole 2 1 one 2 two 3 three 4 circuit a switch only (no coil) b series trip (current) c 4 series trip (voltage) g 4 relay trip (voltage) 5 auxiliary/alarm switch 0 w/o aux switch 1 3 0.110 q.c. term 2 3 0.110 solder lug 3 3 0.110 q.c. term w/ gold contacts 4 3 0.110 pc term 6 frequency & delay 03 3 dc 50/60hz, switch only 10 dc instantaneous 11 dc ultra short 12 dc short 14 dc medium 16 dc long 20 50/60hz instantaneous 21 50/60hz ultra short 22 50/60hz short 24 50/60hz medium 26 50/60hz long 30 dc, 50/60hz, instantaneous 31 dc, 50/60hz,ultra short 32 dc, 50/60hz, short 34 dc, 50/60hz, medium 36 dc, 50/60hz, long 42 4 50/60hz short, hi-inrush 44 4 50/60hz medium, hi-inrush 46 4 50/60hz long, hi-inrush 52 4 dc short, hi-inrush 54 4 dc medium, hi-inrush 56 4 dc long, hi-inrush 7 current rating (amperes) 5 410 1.000 512 1.250 415 1.500 517 1.750 420 2.000 522 2.250 425 2.500 527 2.750 430 3.000 435 3.500 440 4.000 445 4.500 450 5.000 455 5.500 460 6.000 465 6.500 470 7.000 475 7.500 480 8.000 485 8.500 490 9.000 495 9.500 610 10.000 710 10.500 611 11.000 711 11.500 612 12.000 712 12.500 613 13.000 614 14.000 615 15.000 616 16.000 617 17.000 618 18.000 619 19.000 620 20.000 621 21.000 622 22.000 623 23.000 624 24.000 625 25.000 626 26.000 627 27.000 628 28.000 629 29.000 630 30.000 632 32.000 code amperes a06 6dc 5dc a12 12dc 10dc a18 18dc 15dc a24 24dc 20dc a32 32dc 25dc a48 48dc 40dc a65 65dc 55dc j06 6ac 5ac j12 12ac 10ac j18 18ac 15ac j24 24ac 20ac j48 48ac 40ac j65 65ac 55ac k20 120ac 65ac l40 240ac 130ac b10 110dc 59dc b20 120dc 65dc code rating trip volts voltage rating 9 actuator color & legend actuator color white red green blue yellow gray orange i-o a f h k m p r on-off b g j l n q s dual 2 3 4 5 6 7 8 printed circuitboard terminals 12 agency approval a without approvals c ul recognized, csa accepted e ul recognized, csa accepted, tuv certifed 5 ul recognized, csa accepted, tuv certifed, ccc certifed 10 mounting / barriers 6 mounting style threaded insert 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm barriers no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes bracket color black black black black black black black black white white white white white white white white gray gray gray gray gray gray gray gray 1 a 2 b 3 c 4 d 5 e 6 f 7 g 8 h 9 j p k q l u m half rocker guard no no no no yes yes yes yes no no no no yes yes yes yes no no no no yes yes yes yes fi g. b fig. c 11 max. application rating a 65dc d 240ac m 80dc 7 4 80vdc/250vac 8 notes: 1 half guard construction have off protection for actuator 2 standard multipole units have all poles identical, except when specifying auxiliary switch 3 auxiliary switch available on series trip and switch only circuits to 32a. on multipole units, only one aux. switch is normally supplied, mounted in extreme right pole. 4 separate pole type voltage coils not rated for continuous duty. available only with delay code 10 & 20. only available w/ agency code c. 5 for other current ratings, consult factory. 6 on visi-rocker,visi portion of rocker cannot be the same color as the bezel. remainder of rocker same color as bezel. 7 26-32a polarity sensitive, only available as 1 pole unit. 8 voltage code 4 available to 25a max. 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
14 | h-series flat rocker actuator C ordering scheme 1 series 2 actuator 3 poles 5 aux/alarm switch 6 frequency & delay 7 current rating 8 terminal 9 actuator color & legend 10 mounting bezel/barrier 11 rating 12 agency approval 4 circuit h 3 b 1 1 c 3 0 b d 10 450 1 series h 2 actuator 1 3 single color vertical 4 single color horizontal 7 pushCtoCreset, single color vertical 8 pushCtoCreset, single color horizontal 8 terminal 1 push on 0.250 tab (q.c.) 2 screw 8-32 w/upturned lugs 3 screw 8-32 (bus type) a screw m4 w/upturned lugs b screw m4 (bus type) l 90 facing left r 90 facing right s straight t straight, long 3 pole 2 1 one 2 two 3 three 4 circuit a switch only (no coil) b series trip (current) c 4 series trip (voltage) g 4 relay trip (voltage) 5 auxiliary/alarm switch 0 w/o aux switch 1 3 0.110 q.c. term 2 3 0.110 solder lug 3 3 0.110 q.c. term w/ gold contacts 4 3 0.110 pc term 6 frequency & delay 03 3 dc 50/60hz, switch only 10 dc instantaneous 11 dc ultra short 12 dc short 14 dc medium 16 dc long 20 50/60hz instantaneous 21 50/60hz ultra short 22 50/60hz short 24 50/60hz medium 26 50/60hz long 30 dc, 50/60hz, instantaneous 31 dc, 50/60hz,ultra short 32 dc, 50/60hz, short 34 dc, 50/60hz, medium 36 dc, 50/60hz, long 42 4 50/60hz short, hi-inrush 44 4 50/60hz medium, hi-inrush 46 4 50/60hz long, hi-inrush 52 4 dc short, hi-inrush 54 4 dc medium, hi-inrush 56 4 dc long, hi-inrush 7 current rating (amperes) 5 410 1.000 512 1.250 415 1.500 517 1.750 420 2.000 522 2.250 425 2.500 527 2.750 430 3.000 435 3.500 440 4.000 445 4.500 450 5.000 455 5.500 460 6.000 465 6.500 470 7.000 475 7.500 480 8.000 485 8.500 490 9.000 495 9.500 610 10.000 710 10.500 611 11.000 711 11.500 612 12.000 712 12.500 613 13.000 614 14.000 615 15.000 616 16.000 617 17.000 618 18.000 619 19.000 620 20.000 621 21.000 622 22.000 623 23.000 624 24.000 625 25.000 626 26.000 627 27.000 628 28.000 629 29.000 630 30.000 632 32.000 code amperes a06 6dc 5dc a12 12dc 10dc a18 18dc 15dc a24 24dc 20dc a32 32dc 25dc a48 48dc 40dc a65 65dc 55dc j06 6ac 5ac j12 12ac 10ac j18 18ac 15ac j24 24ac 20ac j48 48ac 40ac j65 65ac 55ac k20 120ac 65ac l40 240ac 130ac b10 110dc 59dc b20 120dc 65dc x01 65ac code rating trip volts special catalog # voltage rating printed circuitboard terminals 12 agency approval a without approvals c ul recognized, csa accepted, ccc certifed e ul recognized, csa accepted, tuv certifed 5 ul recognized, csa accepted, tuv certifed, ccc certifed 10 mounting / barriers 6 mounting style threaded insert 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm 6-32 x 0.195 inches 6-32 x 0.195 inches iso m3 x 5mm iso m3 x 5mm barriers no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes no yes bracket color black black black black black black black black white white white white white white white white gray gray gray gray gray gray gray gray 1 a 2 b 3 c 4 d 5 e 6 f 7 g 8 h 9 j p k q l u m push-to- reset no no no no yes yes yes yes no no no no yes yes yes yes no no no no yes yes yes yes 9 actuator color & legend actuator color white black red green blue yellow gray orange i-o a c f h k m p r on-off b d g j l n q s dual 1 2 3 4 5 6 7 8 legend color black white white white white black black black fig. b fig. c 11 max. application rating a 65dc d 240ac m 80dc 7 4 80vdc/250vac 8 notes: 1 push-to-reset actuator shave off portion of rocker shrounded 2 standard multipole units have all poles identical, except when specifying auxiliary switch 3 auxiliary switch available on series trip and switch only circuits to 32a. on multipole units, only one aux. switch is normally supplied, mounted in extreme right pole. 4 separate pole type voltage coils not rated for continuous duty. available only with delay code 10 & 20. only available w/ agency code c. 5 for other current ratings, consult factory. 6 on visi-rocker,visi portion of rocker cannot be the same color as the bezel. remainder of rocker same color as bezel. 7 26-32a polarity sensitive, only available as 1 pole unit. 8 voltage code 4 available to 25a max. 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
| 15 * intentionally left blank 60 johnson avenue ? plainville, ct 06062C1177 ? phone: (860) 793C9281 ? fax: (860) 793C9231 email: sales @ carlingtech.com ? www.carlingtech.com
worldwide headquarters carling technologies, inc. 60 johnson avenue ? plainville, ct 06062-1177 phone: (860) 793-9281 ? fax: (860) 793-9231 email: sales@carlingtech.com ? www.carlingtech.com east region sales offce, ct ? ersm@carlingtech.com midwest region sales offce, il ? mrsm@carlingtech.com west region sales offce, ca ? wrsm@carlingtech.com asia-pacifc headquarters carling technologies, asia-pacifc ltd., kowloon, hong kong int + 852-2737-2277 ? fax: int + 852-2736-9332 email: sales@carlingtech.com.hk shenzhen, china ? shenzhen@carlingtech.com shanghai, china ? shanghai@carlingtech.com pune, india ? india@carlingtech.com kaohsiung, taiwan ? taiwan@carlingtech.com yokohama, japan ? japan@carlingtech.com europe / middle east / africa headquarters carling technologies, ltd., devon, england 06062-1177 int + 44 1392-364422 ? fax: int + 44 1392-364477 email: ltd.sales@carlingtech.com gmbh, germany ? gmbh@carlingtech.com sas, france ? sas@carlingtech.com rev_cb_h_0212

▲Up To Search▲

Price & Availability of HA3-BO-24-450-1B1-DC

	To Download HA3-BO-24-450-1B1-DC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .